Psychrometrics is the science behind Structural Drying And Dehumidification, and skipping it usually means either under-drying a space or leaving equipment running far longer than necessary.
We calculate air mover and dehumidifier placement using psychrometric formulas, not a flat per-room equipment count.

We calculate drying requirements using temperature and humidity data, not a flat per-room rule.
Low Grain Refrigerant dehumidifiers pull significantly more moisture from the air than consumer-grade units.
Thermal imaging cameras reveal moisture patterns behind walls and under flooring that aren't visible to the eye.
Daily logs give you and your insurer verifiable proof of progress, not a technician's word.
Structural drying is a distinct phase with its own methodology, separate from initial extraction, and here's how our Sulphur, OK crews run it.

The assessment sets the baseline every later reading gets measured against.
Thermal cameras scan walls, ceilings, and flooring to reveal moisture invisible to the naked eye.
Dehumidifier capacity is matched to the calculated moisture load for that specific space.
Daily monitoring confirms equipment is working and adjusts the plan if progress stalls.
We adjust drying speed for sensitive materials like hardwood and cabinetry to prevent secondary damage.
The job closes only once moisture readings match the documented dry standard for each material type.
We ask enough to bring the right instruments on the first visit.
Equipment for psychrometric assessment is standard on every drying dispatch.
We complete the psychrometric assessment and thermal scan, then provide a written drying plan and quote.
The job closes only once documented readings confirm the structure is fully dry.

"The thermal imaging found moisture behind a wall that looked completely fine from the outside. Would have missed it otherwise." — Julian R.
"They came back every single day to take readings and showed me the numbers improving. Felt like real science, not guesswork." — Monique T.
"Our hardwood floor didn't warp because they slowed the drying process down specifically for it." — Grant P.
A room can look dry on the surface while moisture meters still detect trapped moisture inside materials.
It's a calculated approach using temperature and humidity data to determine exact equipment needs, rather than guessing.
Typical drying time is 3-5 days for standard materials, longer for sensitive ones like hardwood.
You'll see the actual numbers improve each day through documented logs.
Yes, we use slower, controlled drying specifically calibrated for hardwood to prevent warping.
We reassess the plan, since stalled readings usually mean equipment placement or capacity needs adjusting, not just more time.
If your property is in or near Sulphur, a crew can typically respond the same day.

One call starts the psychrometric assessment process.
Call +1-844-833-1325